How do I calculate the width of a tumbler wrap?

For a straight tumbler, multiply its diameter by pi to find the circumference. Add any seam overlap and bleed required by your workflow.

How many pixels should a tumbler wrap be?

Multiply the wrap width and height in inches by the intended print resolution. A 9.5 by 8.5 inch template at 300 PPI needs 2850 by 2550 pixels.

Does this calculator work for tapered tumblers?

No. A tapered tumbler needs a curved template based on its top and bottom diameters. This calculator is intended for straight-sided cylindrical tumblers.

MEASURE → SIZE → CHECK → DOWNLOAD

Tumbler Wrap Size Calculator

Use your blank’s measurements to calculate a straight tumbler wrap, the pixels needed for printing, and whether your design has enough resolution. Download an exact-size SVG template when you’re ready.

Enter your tumbler measurements

Measure the actual printable area—blank sizes can vary by brand and batch.

Units

I measured the Diameter in inches Printable height in inches

Seam overlap in inches Bleed on each edge in inches Target print resolution

Finished template size 9.45 × 8.38 in Includes 0.13 in overlap and 0.06 in bleed on every edge

Base circumference9.27 in

Required pixels2,836 × 2,513 pxat 300 PPI

Design aspect ratio1.129:1

SVG keeps the physical dimensions and guide lines when imported into compatible design software.

Check your design image

Optional: choose a JPG, PNG, or WebP. The file is inspected locally and is never uploaded.

Drop your design here

or click to choose a file

JPG, PNG, or WebP • processed on your device

THE FORMULA

How to size a straight tumbler wrap

wrap width = (diameter × π) + seam overlap + (2 × bleed)

The tumbler’s circumference is the distance around its body. If you measure the diameter across a straight-sided tumbler, multiply it by π. Add a small overlap only if your process needs the artwork to meet beyond the seam, then add the bleed requested by your printer or transfer workflow.

Use the actual printable height rather than the tumbler’s full height. Rims, tapers, shoulders, and bottom curves may reduce the usable area.

ACCURACY FIRST

Measure the blank you will press

Labels such as “20 oz skinny tumbler” describe capacity and style, not a guaranteed printable size. Measure your blank and check the supplier’s template before cutting or printing.

Straight tumblers onlyThis calculator creates a rectangular wrap. A tapered tumbler needs a curved template based on both its top and bottom diameters.

COMMON QUESTIONS

Tumbler-wrap FAQ

What resolution should I use for a tumbler wrap?

300 PPI is a dependable target for detailed artwork and text. 240 PPI is often still very good. The calculator shows the exact pixel dimensions for the template size and resolution you choose.

Should I add seam overlap?

That depends on your artwork and transfer process. Edge-to-edge patterns often use a small overlap to avoid a visible gap. Follow the blank and equipment supplier’s instructions for your specific setup.

What is bleed?

Bleed extends artwork beyond the intended finished edge so slight alignment differences do not leave an unprinted line. Enter the amount required on each edge; zero is valid when your workflow does not need it.

Why might my supplier’s size be different?

Nominal capacity does not determine exact diameter or printable height. Brands, coatings, lids, rims, and manufacturing tolerances can all change the usable area.